What a mini split costs to run and whether it pays back
A mini split’s running cost comes from two numbers on its spec sheet and one on your bill. This page shows the arithmetic, then what it gives in four states, so you can check it against the tool.
The arithmetic
Makers rate heating with HSPF2 and cooling with SEER2, both in BTU per watt-hour. A kilowatt-hour is 3,412 BTU, according to the EIA. So a heat pump with an HSPF2 of 9.5 turns a kilowatt-hour into 9,500 BTU of heat, where electric baseboard turns it into 3,412.
For a home on electric heat, the new cost is the old cost times 3.412, divided by the HSPF2. The price of power cancels out. The Pioneer Diamante Pro 12,000 BTU lists an HSPF2 of 9.5 for the standard rating and 8.2 for the colder one. On a $1,200 a year electric heating bill:
- Standard rating: $1,200 times 3.412 divided by 9.5 is about $431.
- Colder rating: $1,200 times 3.412 divided by 8.2 is about $499.
Cooling works the same way. A $400 a year air conditioner bill at a SEER of 13 becomes $400 times 13 divided by 20, or $260, for a unit with a SEER2 of 20.
These are rating-test numbers. Real bills differ with weather, how the rooms are used and how well the unit is installed. The tool compares the number on your label with the model’s rating as given, so the saving is approximate.
Against a gas furnace
Gas needs the price of gas, the furnace’s efficiency (the AFUE percentage on its label) and a heat content. The EIA lists a cubic foot of natural gas at 1,036 BTU. Here is an $800 a year gas heating bill, an 80 percent AFUE furnace and the 9.5 HSPF2 unit above, with each state’s EIA prices:
| State | Power and gas prices | Heat pump | Against $800 |
|---|---|---|---|
| Texas | 16.03¢, $19.42 | $576 | Saves $224 |
| Ohio | 18.81¢, $13.85 | $948 | $148 more |
| Pennsylvania | 21.13¢, $15.04 | $981 | $181 more |
| Massachusetts | 30.19¢, $25.06 | $841 | $41 more |
The prices are cents per kilowatt-hour, then dollars per thousand cubic feet. Electricity prices are the EIA’s average residential price for August 2026 year to date. Gas prices are its 2025 residential price by state. Where gas is cheap and power is dear, a heat pump can cost more to run than the furnace it replaces.
What it costs to put in
This site has no sourced installation figure, so it does not make one up. Get a written quote. For a unit the maker says you may install yourself, the quote you need is the electrician’s: MRCOOL’s quick-start sheet says a certified electrician is required to supply power from a disconnect, and Pioneer’s manual says a licensed electrician installs the wiring. The DIY guide quotes them.
Payback
Add the price of the unit to the installation quote and divide by the yearly saving. If the saving is zero or below, there is no payback.
Work it out for your own bills
Facts read on each maker’s own documents on 19 November 2026.